Non-LEGO bits in MOCs?
Moderator: VLC Directors
Non-LEGO bits in MOCs?
Having just seen all of the amazing MOCs (SECs?) at BrickCan, I'm pondering some building.
At events like that, what's the prevailing "rule" for using a non-LEGO item where no matching LEGO piece exists?
For example, I know LEGO lighting isn't super common so people use other lights. I'm trying to think if I saw anything else at BrickCan.
Is it considered "OK" if it's super subtle and not a major portion of the MOC?
At events like that, what's the prevailing "rule" for using a non-LEGO item where no matching LEGO piece exists?
For example, I know LEGO lighting isn't super common so people use other lights. I'm trying to think if I saw anything else at BrickCan.
Is it considered "OK" if it's super subtle and not a major portion of the MOC?
Re: Non-LEGO bits in MOCs?
4 things that are not easily found like official Lego lighting I say go right ahead and use aftermarket lights. Heck I even used wood in a Moc once
VLC Loud mouth
Dave De Gobbi
Dave De Gobbi
- Kyler
- Brick Deity
- Posts: 1865
- Joined: Mon Apr 20, 2015 10:38 am
- Location: North Vancouver, BC
- Contact:
Re: Non-LEGO bits in MOCs?
What level of "okay" are you going for?
I've seen a MOC made entirely out of Megablocks at a con before.
(That being said, it had it's share of closet haters, and would likely never be considered a candidate for a prize.)
I tend to try and not be judgemental. Dave's answer is probably the shortest.
I've seen a MOC made entirely out of Megablocks at a con before.
(That being said, it had it's share of closet haters, and would likely never be considered a candidate for a prize.)
I tend to try and not be judgemental. Dave's answer is probably the shortest.
Kyler Storm - (not the Gladiator)
Re: Non-LEGO bits in MOCs?
I used pennies for weight in my drawbridge. I would consider that acceptable for function. The ballasts would cost a fair bit more, and would be more difficult to get a hold of in quantity.
I own a bit of Lego. A little obsessive by some peoples standards.
- TroopaDee
- Master Poster
- Posts: 617
- Joined: Mon Dec 01, 2014 10:26 pm
- Location: Vancouver, BC Canada. GO CANUCKS GO!
- Contact:
Re: Non-LEGO bits in MOCs?
I think it would depend on what it is. I don't think megabloks is very appropriate but 3rd party items like brickarms and brickforge that could enhance a MOC is in general quite acceptable. I know that there are some 3rd party light up Lego street lamps that I have seen put to good use.
Re: Non-LEGO bits in MOCs?
I've seen people use double sided tape, glue, rubber bands, string, non-LEGO lights and motors, altbricks/brick forge/brick arms, etc. I say do whatever you're comfortable with for your own MOC.
Rhymes with Lettuce
- KenmoreThompson
- MOC Poster
- Posts: 126
- Joined: Fri Apr 21, 2017 2:55 am
Re: Non-LEGO bits in MOCs?
I think everyone has a threshold for non-lego elements beyond which they start to turn a dim eye toward the MOC (even if they're too polite to say so) and I think everyone's threshold will be slightly different.
Almost no one seems to have a problem with lighting. Few people would have an issue with custom flags or stickers, probably, although there are plenty of purists around, too. People will have varying opinions about stuff like modifying bricks, paint, or incorporating Lego-competitors' pieces.
My personal rule of thumb is to not rule anything out, but always err on the side of Lego-produced elements. I had to spray-paint a few pieces for my BrickCan Vault because after months of scouring Bricklink and re-designing a critical section of my build, it was impossible to get all the necessary elements in an appropriate colour.
Almost no one seems to have a problem with lighting. Few people would have an issue with custom flags or stickers, probably, although there are plenty of purists around, too. People will have varying opinions about stuff like modifying bricks, paint, or incorporating Lego-competitors' pieces.
My personal rule of thumb is to not rule anything out, but always err on the side of Lego-produced elements. I had to spray-paint a few pieces for my BrickCan Vault because after months of scouring Bricklink and re-designing a critical section of my build, it was impossible to get all the necessary elements in an appropriate colour.
- Kyler
- Brick Deity
- Posts: 1865
- Joined: Mon Apr 20, 2015 10:38 am
- Location: North Vancouver, BC
- Contact:
Re: Non-LEGO bits in MOCs?
Well put.KenmoreThompson wrote:I think everyone has a threshold for non-lego elements beyond which they start to turn a dim eye toward the MOC (even if they're too polite to say so) and I think everyone's threshold will be slightly different.
Almost no one seems to have a problem with lighting. Few people would have an issue with custom flags or stickers, probably, although there are plenty of purists around, too. People will have varying opinions about stuff like modifying bricks, paint, or incorporating Lego-competitors' pieces.
My personal rule of thumb is to not rule anything out, but always err on the side of Lego-produced elements. I had to spray-paint a few pieces for my BrickCan Vault because after months of scouring Bricklink and re-designing a critical section of my build, it was impossible to get all the necessary elements in an appropriate colour.
Welcome to the forums. I've sent you a PM (if you haven't already discovered it, have a look for it).
Kyler Storm - (not the Gladiator)
- Kyler
- Brick Deity
- Posts: 1865
- Joined: Mon Apr 20, 2015 10:38 am
- Location: North Vancouver, BC
- Contact:
Re: Non-LEGO bits in MOCs?
I try not to be too harsh on any builder's choices (try to keep an open mind), but certainly prefer LEGO parts (and appreciate their use, whenever they exist).
Kyler Storm - (not the Gladiator)
Re: Non-LEGO bits in MOCs?
I for one like to explore the uses of the Lego elements to create a desired look. My preference leans to the purist side of things with weaknesses for the Altbrick fall coloured leaves. At the end of the day it is your creation/art. From an event organizer's standpoint it comes brown to how much and why. For instance if someone brings (to display as a MOC) a whole line of compatible or competitive produces to the Lego Brand for the purposes of promoting it then we would have to turn them away. Adding and filling in gaps in the product line is okay.
-
- Master Poster
- Posts: 721
- Joined: Tue Oct 04, 2011 11:24 pm
- Location: Treasurer (Not financial director)
Re: Non-LEGO bits in MOCs?
Some of the Lego professionals use metal and wood to supply support for their giant MOCs. Even that mega Xwing had metal bars and other materials in it. Some people glue their mocs for extra support too.