Lego Oakridge Pick A Brick wall updates
Moderator: VLC Directors
Re: Lego Oakridge Pick A Brick wall updates
PaB wall at Oakridge is updated: http://www.brickbuildr.com/view/pab/side/off/99/
Column 1 row 4 are tan 1 x 2 x 2 corner plates
Column 5 row 5 are black propeller 3 blades 5 diameter
Column 1 row 4 are tan 1 x 2 x 2 corner plates
Column 5 row 5 are black propeller 3 blades 5 diameter
- Attachments
-
- 92842.jpg (28.3 KiB) Viewed 54723 times
-
- 2420.gif (4.38 KiB) Viewed 54723 times
Re: Lego Oakridge Pick A Brick wall updates
PaB wall at Oakridge is updated: http://www.brickbuildr.com/view/pab/side/off/99/
There are brown horses in bin 4, 2! The bin was half full at about 1:30 pm today.
Bin 3, 3 are the black Travis bricks (1 X 1 brick with studs on 4 sides)
Bin 3, 1 are pink 2 X 6 plates
Bin 8, 5 are 2 X 4 plates in bright blue (Friends colour)
There are brown horses in bin 4, 2! The bin was half full at about 1:30 pm today.
Bin 3, 3 are the black Travis bricks (1 X 1 brick with studs on 4 sides)
Bin 3, 1 are pink 2 X 6 plates
Bin 8, 5 are 2 X 4 plates in bright blue (Friends colour)
Re: Lego Oakridge Pick A Brick wall updates
Thanks for all the updates. Tim picked up horses for me.
Pierre
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
Re: Lego Oakridge Pick A Brick wall updates
Did anyone ever pick up horses for Dean? I think he would be be thrilled to have some, or to know they are back, especially when you can pour blue gems around them.
David Gagnon - (AKA Daveed or Platypus)
Re: Lego Oakridge Pick A Brick wall updates
I sold Xan my cup of horses for Dean when we were there last. I'll see if I can pick a cup up for you, if/when they get horses back. They sold out at Oakridge fast, but Lee got some at Guildford.
Pierre
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
Re: Lego Oakridge Pick A Brick wall updates
I got some in the first wave. Don't Worry about me, I'll fill another cup in Seattle if they have them.
David Gagnon - (AKA Daveed or Platypus)
Re: Lego Oakridge Pick A Brick wall updates
John said he scooped the last of them when he was down there earlier this month (same batch as the ones I got for Pierre)Platypus wrote:I got some in the first wave. Don't Worry about me, I'll fill another cup in Seattle if they have them.
Re: Lego Oakridge Pick A Brick wall updates
I'm going to oak ridge tonight before the meeting, if anyone needs anything let me know
-
- Master Poster
- Posts: 721
- Joined: Tue Oct 04, 2011 11:24 pm
- Location: Treasurer (Not financial director)
Re: Lego Oakridge Pick A Brick wall updates
I was there last night and the pickings were slim.
Re: Lego Oakridge Pick A Brick wall updates
Stuff I think is new:
2x2 trans-blue round brick
1x2 dark azure blue brick
1x2 magenta slope brick
2x2 trans-blue round brick
1x2 dark azure blue brick
1x2 magenta slope brick
Pierre
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
Re: Lego Oakridge Pick A Brick wall updates
Lime green 1x2 jumper plates
Orange 1x2 slope brick. (New?)
Dark trans blue 1x1 round plate
Transs red 1x1 tile (new?)
Back again:
Red flower sprues
Green stems
Orange 1x2 slope brick. (New?)
Dark trans blue 1x1 round plate
Transs red 1x1 tile (new?)
Back again:
Red flower sprues
Green stems
Pierre
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
Re: Lego Oakridge Pick A Brick wall updates
Oakridge has brown horses again. Also 1 x 4 x 6 white frames and white doors.
Re: Lego Oakridge Pick A Brick wall updates
Quick update:
1x1 light bluish grey tile, round
1x2 dark azure bricks at Oakridge again.
1x4 green tiles (which I recently noticed that I have very few in my collection)
1x1 light bluish grey tile, round
1x2 dark azure bricks at Oakridge again.
1x4 green tiles (which I recently noticed that I have very few in my collection)
-Bryan
- Bricksky
- Brick Overlord
- Posts: 1065
- Joined: Sun Jan 20, 2013 1:30 pm
- Location: Vancouver
- Blogged: http://VLC.ca/forums/viewtopic.php?f=8&t=4560
- Contact:
Re: Lego Oakridge Pick A Brick wall updates
Useful parts on wall today:
1 x 2 Slope (White)
1 x 2 Brick modified with studs on one side (Tan)
1 x 2 Slope (White)
1 x 2 Brick modified with studs on one side (Tan)
Re: Lego Oakridge Pick A Brick wall updates
Anyone know if the Oakridge store still has these on the wall at Oakridge?
1 x 2 Brick modified with studs on one side (Tan)
- TheRebricker
- Master Poster
- Posts: 789
- Joined: Fri Oct 03, 2014 7:29 pm
- Location: North Vancouver
- Blogged: http://VLC.ca/forums/viewtopic.php?f=8&t=4559
Re: Lego Oakridge Pick A Brick wall updates
darbee wrote:Anyone know if the Oakridge store still has these on the wall at Oakridge?
1 x 2 Brick modified with studs on one side (Tan)
I was there Thursday and they still had lots.
- Jason
- TheRebricker
- Master Poster
- Posts: 789
- Joined: Fri Oct 03, 2014 7:29 pm
- Location: North Vancouver
- Blogged: http://VLC.ca/forums/viewtopic.php?f=8&t=4559
Re: Lego Oakridge Pick A Brick wall updates
Thanks. I've got quite a bit of the 1x2 trans brown(smoke) brick, so if anyone prefers that and would be good with swapping for 50 to 100 1x2 trans clear brick, that would be greatly appreciated.
These are the new models.
These are the new models.
Pierre
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
Re: Lego Oakridge Pick A Brick wall updates
Any word on when those new models are supposed to appear?chump wrote:These are the new models.
Rhymes with Lettuce
Re: Lego Oakridge Pick A Brick wall updates
Based on what Jason updated, it looks like all the pieces for the plane are at the Oakridge mall. When I had called Guildford last week (as I need pieces in the elephant) Susan said that the printed instructions/meida were delayed and both stores said that at the time, they hadn't received all the pieces either.davethebest wrote:Any word on when those new models are supposed to appear?chump wrote:These are the new models.
I'll probably head up to Oakridge tonight or tomorrow and find out as I'll be needing pieces. I might ask someone pick up the pieces from Guildford that I need before the next meeting.
Because Guildford has the bigger wall, they get both models at the same time for three months. Oakridge has a smaller wall so they only do one at a time for six weeks. Typically Oakridge runs out of pieces before the end of six weeks, Guildford as far as I've seen does not.
Pierre
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
VLC Member
My avatar is Ninjago's Pythor P Chumsworth. YAY! I finally have him! Thank you.
- TheRebricker
- Master Poster
- Posts: 789
- Joined: Fri Oct 03, 2014 7:29 pm
- Location: North Vancouver
- Blogged: http://VLC.ca/forums/viewtopic.php?f=8&t=4559
Re: Lego Oakridge Pick A Brick wall updates
Yeah, they said what is on the wall is all they have right now and their order was a little delayed. So it looks like that is all until their next expected order which is Tuesday (according to the perveyor or Lego I spoke with).
Only the plane was on the pick-a-model display.
Only the plane was on the pick-a-model display.
- Jason
- Kyler
- Brick Deity
- Posts: 1879
- Joined: Mon Apr 20, 2015 10:38 am
- Location: North Vancouver, BC
- Contact:
Re: Lego Oakridge Pick A Brick wall updates
I updated the PAB wall parts list again: http://wallofbricks.com/pab-display.php ... tore_id=99
Unfortunately they still have yet to receive any 1x2 trans clear brick
Unfortunately they still have yet to receive any 1x2 trans clear brick
Kyler Storm - (not the Gladiator)
- TroopaDee
- Master Poster
- Posts: 617
- Joined: Mon Dec 01, 2014 10:26 pm
- Location: Vancouver, BC Canada. GO CANUCKS GO!
- Contact:
Re: Lego Oakridge Pick A Brick wall updates
Yeah I went in the other day trying to get a bunch of the 2x2 trans clear slope and 1x2 trans clear brick but there were no trans clear brick. The guy told me to come back in 3 weeks.Kyler wrote:I updated the PAB wall parts list again: http://wallofbricks.com/pab-display.php ... tore_id=99
Unfortunately they still have yet to receive any 1x2 trans clear brick
- Saarstar
- MOC Poster
- Posts: 118
- Joined: Tue Jan 26, 2016 11:58 pm
- Location: Vancouver (Cambie Village)
- Contact:
Re: Lego Oakridge Pick A Brick wall updates
Updated as of yesterday:
http://wallofbricks.com/pab-display.php ... tore_id=99
Empty bin on the far right has mixed contents.
Two bins are awaiting new parts.
http://wallofbricks.com/pab-display.php ... tore_id=99
Empty bin on the far right has mixed contents.
Two bins are awaiting new parts.
Alex S.